Expansion Joints With Control Rod Assembly :

1. The TC Rubber Expansion Joints with Control Rod Assembly play a vital role in withstanding movements originating from dynamic equipment during operation
2. Where the normal operating pressure is exceeded Control rod assembly must be used
3. Control assemblies are recommended on spring mounted pumps and equipment’s and easy to install & align

Single Arch Type Expansion Joints :

1. The shortest face to face dimensions are available with this design.
2. Construction is of natural or synthetic rubber, reinforced with nylon chord.
3. Galvanised split metal retaining ring are on either side of joints.
4. Rubber faced flange is of sufficient thickness to form a tight seat against metal flanges without the use of gasket.

Multiple Arch Type Expansion Joints :

1. Rubber Expansion joints with two or more arches are manufactured to accommodate greater movements than those of single type joints
2. Fabrication of Natural or synthetic elastomers, depending on specific application
3. Galvanised split metal retaining ring are on either side of joints.

Floating Flange Spherical Type :

1. Made from special weave fabric for reinforcement, the spherical shape offers a high burst pressure and requires low forces to flex.
2. Fabrication of Natural or synthetic elastomers, depending on specific application.
3. Galvanised steel solid flanges are inserted on either side of the joint